Full front embroidery size
A full front embroidery design is usually 8 to 12 inches (200–300 mm) wide, centered with the top about 3–4 inches below the collar. Designs this size need a large hoop, often 8×12 in or bigger, and a stable cut-away backing.
- 8–12 in wide
- 200–300 mm
- 8×12" hoop
- Hoodie or sweatshirt
Full front size at a glance
- Width
- 8–12 in (200–300 mm)
- Height
- up to about 12 in (300 mm) tall
- Position
- Centered on the front, with the top about 3–4 in below the collar.
- Typical design
- 10 × 7 in (254 × 178 mm)
- Stitch count
- About 25,600–43,900 stitches at the typical size, from open to fully filled
- Smallest common hoop
- 8×12" (design turned sideways)
- Backing
- Medium-heavy cut-away (2.5–3 oz) on hoodie or sweatshirt
- Smallest lettering
- About 5 mm (0.2 in) capital height
Tips for this placement
- Use open, lighter designs on t-shirts: a solid 10 in fill makes thin knit stiff and heavy.
- Check your largest hoop before you design; many home machines top out at 6×10 or 8×12 in.
- Fleece and sweatshirt fabric carries large designs better than lightweight tees.
Common on
Sweatshirts · Team and college designs · Statement tees · Hoodies
Make the file
Your logo at 10 × 7 in, ready to stitch
Upload the artwork, set the width to 10 in and the digitizer builds stitches, underlay and density for exactly this size. Check the sew-out, then download DST, PES, JEF or any other format.
Sizes for every spot
Free account
See your design at its real size
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Full front size questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What size is a full front embroidery design?
A full front embroidery design is usually 8 to 12 inches (200–300 mm) wide, centered with the top about 3–4 inches below the collar. Designs this size need a large hoop, often 8×12 in or bigger, and a stable cut-away backing.
What hoop do I need for a full front design?
Usually an 8×12 in (200×300 mm) or larger hoop. A 6×10 in hoop handles designs up to about 6 by 10 inches.
Is embroidery good for large chest designs?
Yes on sweatshirts, hoodies and jackets. On thin tees, keep the design open or consider printing the large area and embroidering accents.
What size should I digitize the design at?
Digitize it at the final size, here about 10 × 7 in, rather than resizing a finished file: the stitches, density and underlay are then calculated for that size.
The right size, the first time
Sign up free, upload your logo, set the size and see exactly how it will stitch before you hoop anything.