Full back embroidery size
A full back or jacket back embroidery design is usually 10 to 12 inches (250–300 mm) wide, centered with the top about 3–5 inches below the collar. It needs a large hoop or a design split into sections, and heavy cut-away backing.
- 10–12 in wide
- 250–300 mm
- 9.5×14" hoop
- Denim or canvas
Full back size at a glance
- Width
- 10–12 in (250–300 mm)
- Height
- up to about 12 in (300 mm) tall
- Position
- Centered on the back, with the top about 3–5 in below the collar.
- Typical design
- 11 × 8 in (279 × 203 mm)
- Stitch count
- About 32,200–55,100 stitches at the typical size, from open to fully filled
- Smallest common hoop
- 9.5×14" (design turned sideways)
- Backing
- Medium-heavy tear-away (2.5 oz) on denim or canvas
- Smallest lettering
- About 5 mm (0.2 in) capital height
Tips for this placement
- Scale down for small sizes: about 9–10 in on a small, 12 in on an XL.
- Large designs sew for a long time; keep the density moderate to avoid a stiff, bulletproof patch.
- If your hoop is too small, split the design along a natural break and re-hoop with care.
Common on
Jacket backs · Hoodies · Club and team jackets · Statement sweatshirts
Make the file
Your logo at 11 × 8 in, ready to stitch
Upload the artwork, set the width to 11 in and the digitizer builds stitches, underlay and density for exactly this size. Check the sew-out, then download DST, PES, JEF or any other format.
Sizes for every spot
Free account
See your design at its real size
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Full back size questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What size is a full back embroidery design?
A full back or jacket back embroidery design is usually 10 to 12 inches (250–300 mm) wide, centered with the top about 3–5 inches below the collar. It needs a large hoop or a design split into sections, and heavy cut-away backing.
How big is a jacket back embroidery?
Usually 10 to 12 inches wide on adult jackets, a little smaller on small sizes and youth jackets.
Can a home machine sew a full back?
Only with a large hoop (8×12 in or bigger) or by splitting the design into parts sewn in separate hoopings.
What size should I digitize the design at?
Digitize it at the final size, here about 11 × 8 in, rather than resizing a finished file: the stitches, density and underlay are then calculated for that size.
The right size, the first time
Sign up free, upload your logo, set the size and see exactly how it will stitch before you hoop anything.