9.5x14 embroidery hoop: size and what fits
A 9½x14 embroidery hoop has a sewing field of about 240 × 360 mm (9.4 × 14.2 in). Keep designs about 3 mm inside each edge, so the largest design is roughly 234 × 354 mm. Typical uses: large-field home machines, full backs.
- 240 × 360 mm field
- Max design 234 × 354 mm
- 14 placements fit
9.5x14 hoop at a glance
- Sewing field
- 240 × 360 mm (9.4 × 14.2 in)
- Largest design
- 234 × 354 mm (9.21 × 13.94 in)
- Safety margin
- 3 mm from each edge
- Field area
- 864 cm² (133.9 in²)
- Good for
- Large-field home machines, full backs
Placements that fit
- Left chest
- Right chest
- Center chest
- Full front
- Back of the neck
- Full back
- Upper sleeve
- Cap front
- Cap side
- Cap back
- Beanie cuff
- Tote bag
- Bath towel
- Hand towel
At each placement's typical size; tap one for its exact dimensions.
Machines that can sew a 9.5x14 design
Free designs that fit a 9.5x14 hoop
Every free design fits a 4×4 hoop, so all of them sew in a 9.5x14. Download them free with an account.
Free account
Make designs sized for your 9.5x14 hoop
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
9.5x14 hoop questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What size is a 9.5x14 embroidery hoop in mm?
Its sewing field is about 240 × 360 mm (9.4 × 14.2 in). The outer frame is bigger; the field is the area the needle can reach.
What is the biggest design for a 9.5x14 hoop?
About 234 × 354 mm, keeping 3 mm clear of each edge. Many machines also accept the design turned 90 degrees.
Can I sew smaller designs in a 9.5x14 hoop?
Yes. Any design that fits a 4x4, 5x7, 6x10, 8x8, 8x12 hoop also fits, but using the smallest hoop that fits holds the fabric tighter and gives the best results.
Which machines can sew a 9.5x14 design?
Machines whose largest field is at least 240 × 360 mm, such as the Pfaff creative icon 2, Brother Stellaire XJ1, Brother Luminaire XP3, Baby Lock Meridian 2. Check that your model takes a hoop this size.
How do I make a design that fits?
Upload your artwork to the digitizer and set the width and height inside 234 × 354 mm. The stitches are calculated for that size, so nothing has to be resized later.
Other hoop sizes
Designs that fill your 9.5x14 hoop
Sign up free, upload any image and set it to fit your hoop. Preview the stitches, then download for your machine.