8x8 embroidery hoop: size and what fits
A 8x8 embroidery hoop has a sewing field of about 200 × 200 mm (7.9 × 7.9 in). Keep designs about 3 mm inside each edge, so the largest design is roughly 194 × 194 mm. Typical uses: pillows, round or square designs.
- 200 × 200 mm field
- Max design 194 × 194 mm
- 10 placements fit
8x8 hoop at a glance
- Sewing field
- 200 × 200 mm (7.9 × 7.9 in)
- Largest design
- 194 × 194 mm (7.64 × 7.64 in)
- Safety margin
- 3 mm from each edge
- Field area
- 400 cm² (62.0 in²)
- Good for
- Pillows, round or square designs
Placements that fit
- Left chest
- Right chest
- Center chest
- Back of the neck
- Upper sleeve
- Cap front
- Cap side
- Cap back
- Beanie cuff
- Hand towel
At each placement's typical size; tap one for its exact dimensions.
Machines that can sew a 8x8 design
Free designs that fit a 8x8 hoop
Every free design fits a 4×4 hoop, so all of them sew in a 8x8. Download them free with an account.
Free account
Make designs sized for your 8x8 hoop
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
8x8 hoop questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What size is a 8x8 embroidery hoop in mm?
Its sewing field is about 200 × 200 mm (7.9 × 7.9 in). The outer frame is bigger; the field is the area the needle can reach.
What is the biggest design for a 8x8 hoop?
About 194 × 194 mm, keeping 3 mm clear of each edge. Many machines also accept the design turned 90 degrees.
Can I sew smaller designs in a 8x8 hoop?
Yes. Any design that fits a 4x4, 5x7 hoop also fits, but using the smallest hoop that fits holds the fabric tighter and gives the best results.
Which machines can sew a 8x8 design?
Machines whose largest field is at least 200 × 200 mm, such as the Brother PR680W, Baby Lock Alliance, Janome Memory Craft 400E, Janome Memory Craft 500E. Check that your model takes a hoop this size.
How do I make a design that fits?
Upload your artwork to the digitizer and set the width and height inside 194 × 194 mm. The stitches are calculated for that size, so nothing has to be resized later.
Other hoop sizes
Designs that fill your 8x8 hoop
Sign up free, upload any image and set it to fit your hoop. Preview the stitches, then download for your machine.