6x10 embroidery hoop: size and what fits
A 6x10 embroidery hoop has a sewing field of about 160 × 260 mm (6.3 × 10.2 in). Keep designs about 3 mm inside each edge, so the largest design is roughly 154 × 254 mm. Typical uses: tote bags, larger names, quilt blocks.
- 160 × 260 mm field
- Max design 154 × 254 mm
- 12 placements fit
6x10 hoop at a glance
- Sewing field
- 160 × 260 mm (6.3 × 10.2 in)
- Largest design
- 154 × 254 mm (6.06 × 10.00 in)
- Safety margin
- 3 mm from each edge
- Field area
- 416 cm² (64.5 in²)
- Good for
- Tote bags, larger names, quilt blocks
Placements that fit
- Left chest
- Right chest
- Center chest
- Back of the neck
- Upper sleeve
- Cap front
- Cap side
- Cap back
- Beanie cuff
- Tote bag
- Bath towel
- Hand towel
At each placement's typical size; tap one for its exact dimensions.
Machines that can sew a 6x10 design
Free designs that fit a 6x10 hoop
Every free design fits a 4×4 hoop, so all of them sew in a 6x10. Download them free with an account.
Free account
Make designs sized for your 6x10 hoop
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
6x10 hoop questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What size is a 6x10 embroidery hoop in mm?
Its sewing field is about 160 × 260 mm (6.3 × 10.2 in). The outer frame is bigger; the field is the area the needle can reach.
What is the biggest design for a 6x10 hoop?
About 154 × 254 mm, keeping 3 mm clear of each edge. Many machines also accept the design turned 90 degrees.
Can I sew smaller designs in a 6x10 hoop?
Yes. Any design that fits a 4x4, 5x7, 8x8 hoop also fits, but using the smallest hoop that fits holds the fabric tighter and gives the best results.
Which machines can sew a 6x10 design?
Machines whose largest field is at least 160 × 260 mm, such as the Brother PR680W, Baby Lock Aventura II, Janome Memory Craft 500E, Janome Memory Craft 550E. Check that your model takes a hoop this size.
How do I make a design that fits?
Upload your artwork to the digitizer and set the width and height inside 154 × 254 mm. The stitches are calculated for that size, so nothing has to be resized later.
Other hoop sizes
Designs that fill your 6x10 hoop
Sign up free, upload any image and set it to fit your hoop. Preview the stitches, then download for your machine.