Embroidery size chart

Standard design sizes for every place you can embroider, in inches and millimeters, with where each one sits and a drawing to scale. Pick a placement for the hoop, backing and stitch count.

Standard embroidery design sizes by placement
PlacementWidth (in)Width (mm)HeightWhere it sits
Left chest3–4 in75–100 mmup to about 3 in (75 mm) tallAbout 7–9 in below the shoulder seam at the collar, and 3.5–5 in from the center front, over the wearer's heart.
Right chest2–3.5 in50–90 mmusually 1–2 in (25–50 mm) tall for namesMirrors the left chest on the wearer's right side, at the same height.
Center chest4–8 in100–200 mmusually 2–6 in (50–150 mm) tallCentered on the front, with the top about 3–4 in below the collar.
Full front8–12 in200–300 mmup to about 12 in (300 mm) tallCentered on the front, with the top about 3–4 in below the collar.
Back of the neck2–4 in50–100 mmabout 0.5–1.5 in (12–40 mm) tallCentered, about 1–2 in below the collar seam on the back.
Full back10–12 in250–300 mmup to about 12 in (300 mm) tallCentered on the back, with the top about 3–5 in below the collar.
Upper sleeve2.5–3.5 in65–90 mmusually 1–3 in (25–75 mm) tallOn the outside of the sleeve, about 2–4 in below the shoulder seam.
Cap front4–5 in100–125 mmup to about 2–2.25 in (50–57 mm) tallCentered on the front panel, just above the brim.
Cap side1.5–3 in40–75 mmabout 1–1.5 in (25–40 mm) tallOn a side panel, clear of the seams and the eyelets.
Cap back2–3 in50–75 mmabout 1 in (25 mm) tallCentered above the strap opening.
Beanie cuff2–4 in50–100 mmunder about 1.75 in (45 mm) tallCentered on the front of the folded cuff.
Tote bag5–10 in125–250 mmusually 4–10 in (100–250 mm) tallCentered, a little above the middle of the front panel.
Bath towel6–12 in150–300 mmabout 2–4 in (50–100 mm) tallCentered on or just above the woven border.
Hand towel3–6 in75–150 mmabout 1.5–2 in (40–50 mm) tallCentered on or just above the woven border.

Typical ranges for adult garments; scale down for youth and small sizes.

Diagrams

Every placement, drawn to scale

Free account

Digitize your design at exactly the right size

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Embroidery size questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What is the standard size for embroidery?

It depends on where it goes: about 3–4 in wide for a left chest logo, 4–5 in wide and up to 2.25 in tall on a cap front, 10–12 in wide for a full back, and 2.5–3.5 in on a sleeve.

What is the most common embroidery size?

The left chest logo, about 3.5 in (90 mm) wide, is the most common size in business embroidery. On home machines, designs that fit a 4×4 in (100×100 mm) or 5×7 in hoop are the most common.

What's the biggest embroidery design I can sew?

Your hoop sets the limit. Home machines usually go up to 6×10 or 8×12 in; larger designs are split into sections and sewn in several hoopings.

Should I resize a file or digitize at the final size?

Digitize at the final size when you can. Resizing an existing file more than about 10–20% changes the stitch density; digitizing again recalculates it.

Size it, see it, stitch it

Sign up free, upload your logo, set the width for the placement and preview the stitches before you hoop.