Husqvarna Viking Designer Jade 35: hoop size, file format and designs

The Husqvarna Viking Designer Jade 35 is a sewing and embroidery machine with a maximum embroidery area of 9.5 x 6 in (240 × 150 mm). It loads designs from a USB stick.

The Husqvarna Viking Designer Jade 35 embroidery field, 240 by 150 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in240 × 150 mm field

Husqvarna Viking Designer Jade 35 embroidery specs

Type
Sewing and embroidery combo
Largest embroidery area
9.5 x 6 in (240 × 150 mm)
Hoops included
DESIGNER Jewel Hoop, 240 x 150 mm
Getting designs on
USB stick
  • 70 designs come on the included USB embroidery stick.

From Husqvarna Viking's published specifications, checked October 2026. Models vary by country; your manual has the final word.

What fits in the 9.5 x 6 in field

Your own designs

From any image to a VP3 file for the Designer Jade 35

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, WebP or SVG. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 240 × 150 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download VP3

    Copy the .vp3 file to a USB stick and load it on the Designer Jade 35.

Free designs

Free designs that fit the Designer Jade 35

Every free design fits a 4×4 in hoop and downloads as VP3 with a free account.

All free designs

Free account

Make your first design for the Designer Jade 35

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Husqvarna Viking Designer Jade 35 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Husqvarna Viking Designer Jade 35?

Its largest embroidery field is 9.5 x 6 in (240 × 150 mm). It comes with DESIGNER Jewel Hoop, 240 x 150 mm hoop. Designs must fit inside the field of the hoop you use.

What file format does the Husqvarna Viking Designer Jade 35 use?

Husqvarna Viking Designer Jade 35 machines use the VP3 format for designs. Check the manual for any other formats your model reads.

How do I get designs onto the Husqvarna Viking Designer Jade 35?

Use a USB stick (USB stick). With a USB stick, copy the .vp3 file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Husqvarna Viking Designer Jade 35?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 9.5 x 6 in field and download a VP3 file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Husqvarna Viking Designer Jade 35?

At this field size: left chest, right chest, center chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff, bath towel and hand towel designs at their typical sizes. Larger placements like full front or full back need a bigger field or a split design.

Other Husqvarna Viking models

Popular embroidery machines

Designs for your Designer Jade 35, in seconds

Sign up free, upload any image and download a VP3 file sized for your machine.