Can you embroider on mesh?
Yes. Athletic mesh and the mesh backs of trucker caps can be embroidered with a ballpoint 75/11 needle, a cut-away or no-show mesh backing and a water-soluble topping to bridge the holes. Choose bold, solid designs, since fine details fall into the gaps, and hoop the mesh smooth without stretching. Most cap logos still go on the solid front panel.
Verdict: Yes, with care
Needle
Ballpoint 75/11
Stabilizer
Cut-away or no-show mesh
Topping
Water-soluble, to bridge the holes
Design density
Medium; bold shapes
Hooping
Smooth, never stretched
How to embroider on mesh
- 1
Prepare
Fit a ballpoint 75/11 needle and cut cut-away or no-show mesh a little bigger than the hoop.
- 2
Hoop
Smooth, never stretched.
- 3
Digitize
Pick a design with medium; bold shapes, sized for the item, with the right fabric setting.
- 4
Stitch and finish
Add a water-soluble topping, then sew a test first, then trim and finish.
Tips for mesh
- Put detailed logos on the solid front panel of caps.
- Use a topping on open mesh every time.
- Bold, filled designs cover the holes.
- Test on a scrap of the same mesh.
Avoid
- Thin outlines that fall into the holes.
- Stretching the mesh in the hoop.
Try it on mesh
Start with a free design, or your own artwork
Every free design downloads in every machine format with a free account. Or upload a logo and Embrizo digitizes it with settings for the fabric you pick.
Free account
Designs tuned for mesh
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Embroidering mesh: questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
Can you embroider on mesh?
Yes. Athletic mesh and the mesh backs of trucker caps can be embroidered with a ballpoint 75/11 needle, a cut-away or no-show mesh backing and a water-soluble topping to bridge the holes. Choose bold, solid designs, since fine details fall into the gaps, and hoop the mesh smooth without stretching. Most cap logos still go on the solid front panel.
What needle should I use for mesh?
Ballpoint 75/11. Change it often; a dull needle drags and can mark or tear mesh.
What stabilizer is best for mesh?
Cut-away or no-show mesh. Topping: water-soluble, to bridge the holes.
How dense should designs be on mesh?
Medium; bold shapes. Embrizo's fabric settings adjust density, underlay and pull compensation when you digitize.
Can I get a design digitized for mesh?
Yes. Upload your logo or artwork to Embrizo, pick the closest fabric setting and download a file for your machine, with a realistic stitch preview first.
Can you embroider on…
Ready to stitch on mesh?
Sign up free, upload a logo or picture, pick the fabric and get a ready-to-sew file with a realistic stitch preview first.