Embrizo

Convert PCS to JEF

Open a .pcs embroidery file and download it as Janome JEF for Janome, Elna machines. Every stitch is kept, and the conversion runs in your browser.

Drop your .pcs file here

DST, PES, JEF, EXP, VP3, XXX, PEC, U01, TBF, HUS, SHV, SEW, JPX, PCS · opened right in your browser

Step by step

How to convert PCS to JEF

Four steps, all in your browser.

  1. 1

    Open your .pcs file

    Drop the PCS file into the converter above. It opens right in your browser for free.

  2. 2

    Check the preview

    Look over the stitch preview, size, stitch count and colors to confirm it's the right design.

  3. 3

    Set the thread colors

    Pick the thread for each color so your JEF file shows the right colors.

  4. 4

    Download the .jef file

    Downloads are included in every plan. Copy the file to your Janome machine by USB stick or its transfer app.

About the format

What a PCS file is

PCS is the format of older Pfaff embroidery machines such as the creative 7570 and 2140, and of Pfaff's PC-Designer software. Designs made for those machines are PCS files.

A PCS file holds its colors as real color values and stores each needle position in sixths of a millimetre. Current Pfaff machines use VP3, as Husqvarna Viking machines do, so VP3 is the usual format to convert a PCS design to.

Compare

PCS vs JEF

Property.PCS.JEF
Made byPfaffJanome
MachinesPfaffJanome, Elna
Thread colorsStored in fileStored in file
Mostly used byOlder Pfaff creative home machinesJanome and Elna home machines

JEF is Janome's embroidery format, used by the Memory Craft and Skyline embroidery machines and by Elna machines built on the same platform.

Good to know

What changes when you convert

  • Every stitch is kept

    PCS stores needle positions in sixths of a millimetre and JEF in 0.1 mm steps, so each position moves to the nearest step, 0.05 mm at most. Moves longer than JEF allows are split automatically.

  • Thread colors carry over

    The colors stored in the PCS file are written to the JEF file. JEF uses a fixed thread palette, so each color snaps to the closest Janome thread.

  • Jumps become trims

    Every jump between sections is written as a trim and a jump, so loose threads are cut on machines with an automatic trimmer.

Free account

Create designs from your own artwork

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

PCS to JEF questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

Can a current Pfaff machine read PCS files?

Some can. The creative icon 2 and creative 4.5 still list PCS among the formats they load, while the creative 1.5 loads VP3 only. Converting the design to VP3 works on all of them and keeps the stitches and the colors.

Does converting a PCS file change the stitches?

Barely. PCS stores positions in sixths of a millimetre and current formats use tenths, so each needle position moves to the nearest 0.1 mm: at most 0.05 mm, far less than the width of a thread.

Is converting PCS to JEF lossless?

Every stitch is kept. PCS stores positions in sixths of a millimetre and JEF in tenths, so each needle position moves to the nearest 0.1 mm, far less than the width of a thread.

Will my Janome machine read the converted file?

Yes, if it reads JEF. The file is written to the Janome JEF specification and checked against independent readers. Most Janome machines read JEF; your manual lists the exact formats.

Is the converter free?

Opening a PCS file and checking its stitches, colors and size is free. Downloading the JEF file needs a paid plan, from $8 a month billed annually.

Is my file uploaded anywhere?

No. The file is opened and previewed entirely in your browser. When you download, only its stitch data is sent to create the converted file.

Can I resize the design while converting?

Not in the converter, which keeps the stitches exactly as they are. To change the size, digitize the original artwork again in the digitizer, since scaling stitch files changes their density.

Keep going

Related tools and guides

Have the original artwork?

Digitize it from scratch for a cleaner JEF at exactly the size you need.