In-the-hoop key fob maker
Pick a key fob, bookmark, gift tag, ornament, coaster or luggage tag, type a name and choose the lettering and threads. You get the whole in-the-hoop file: placement line, tack-down, the name and a satin border through both layers.
86 × 28 mm (3.4 × 1.1 in) · fits a 4×4 hoop
Project
Lettering
Name thread
Border thread
Felt or vinyl color (preview)
Color stop 1
Placement line
Hoop a tear-away or cut-away stabilizer and stitch the outline.
Color stop 2
Tack-down
Lay felt, vinyl or cotton over the outline and stitch it down. Trim the fabric close to the line.
Color stop 3
Name
The name stitches through the top fabric.
Color stop 4
Satin border
Tape the backing piece under the hoop, stitch the satin border through both layers, then trim and punch the hole.
In-the-hoop key fob · 4 color stops
- Stitches
- 1,402
- Colors
- 3
- Trims
- 6
- Width
- 89.4 mm
- Height
- 31.5 mm
- Sew time
- ~3 min
Thread colors
- 1104
- 2118
- 31,180
- What it does
- Make an in-the-hoop key fob, bookmark, gift tag or ornament with a name: placement line, tack-down, name and satin border in one file.
- Price
- Free preview; saving machine files needs a plan
- Works on
- Any browser: Windows, Mac, Chromebook, iPad and phones
- Privacy
- Runs in your browser; your images and files aren't uploaded
6 projects, sized to fit your hoop
Key fob
86 × 28 mm (3.4 × 1.1 in), fits a 4×4 hoop. The name goes up to about 15 mm tall.
Bookmark
50 × 150 mm (2 × 6 in), fits a 5×7 hoop. The name goes up to about 30 mm tall.
Gift tag
60 × 86 mm (2.4 × 3.4 in), fits a 4×4 hoop. The name goes up to about 24 mm tall.
Ornament
80 × 80 mm (3.1 in round), fits a 4×4 hoop. The name goes up to about 24 mm tall.
Coaster
88 × 88 mm (3.5 in square), fits a 4×4 hoop. The name goes up to about 30 mm tall.
Luggage tag
70 × 115 mm (2.8 × 4.5 in), fits a 5×7 hoop. The name goes up to about 30 mm tall.
In-the-hoop projects that look store-bought
- Hoop the stabilizer only, drum tight; the fabric is laid on top, never hooped.
- Cut the front and back pieces about 1 cm (⅜ in) bigger than the outline on every side.
- Use thread on the bobbin that matches the border, since the back of the project shows.
- Trim the front fabric close to the tack-down before the name, so no edges peek out from the border.
- Make several at once: hoop a larger stabilizer and stitch two or three side by side.
Other quick embroidery projects
Free account
Start digitizing in under a minute
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What is an in-the-hoop embroidery project?
A project made entirely in the embroidery hoop, with no sewing machine: the file stitches a placement line, tacks down the fabric, adds the design, and finishes with a satin border through all the layers. Key fobs, bookmarks, gift tags and ornaments are the classic first projects.
What do I need to make an in-the-hoop key fob?
Tear-away or cut-away stabilizer, felt, marine vinyl or cork for the front and back, a little tape to hold the back piece, sharp scissors, a hole punch and a key ring. A 4×4 hoop is enough for the key fob, gift tag, ornament and coaster; the bookmark and luggage tag need a 5×7.
How do I attach the back of an in-the-hoop project?
Before the satin border, take the hoop off the machine without unhooping, tape the backing piece under the hoop so it covers the whole outline, put the hoop back and stitch the border through both layers. Trim close to the satin afterwards.
How big can the name be?
Up to 12 characters. The maker fits the name inside the project's text area: about 15 mm tall on the key fob and 22–26 mm on the bookmark, gift tag and ornament. Shorter names come out bigger.
Which fabric is best for in-the-hoop key fobs?
Marine vinyl and faux leather look store-bought and don't fray; felt is the easiest to start with; cork is sturdy and natural. Use a fresh 75/11 sharp needle on vinyl and cork, and lengthen the satin slightly if the needle perforates the vinyl.
Is the in-the-hoop maker free?
Designing and previewing your project is free. Saving the embroidery file needs a paid plan, from $8 a month billed annually.
More tools
Keep going
GuideHow to make in-the-hoop keychainsWhat an in-the-hoop keychain is and the common styles, the sewing sequence step by step, vinyl, felt, stabilizer, rings, snaps and eyelets, sizes and how many fit each hoop, adding names, making your own ITH keychain design with the appliqué maker, costs and selling prices, and the Embrizo route.Read the guide
GuideHow to make an in-the-hoop coasterWhat an in-the-hoop coaster is, the size and hoop it needs, which fabrics hold up to wet mugs (cork, vinyl, felt and quilted cotton), the four color stops step by step, attaching the back, making a set of four, what to stitch on them and the mistakes that make coasters curl.Read the guide
GuideHow to make an in-the-hoop bookmarkWhat an in-the-hoop bookmark is, the size and hoop it needs, the best fabrics (felt, cork, vinyl and cotton), the four color stops step by step, attaching the back piece, trimming and finishing with a tassel, mistakes to avoid and ideas for gifts and sales.Read the guide
GuideHow to make embroidered gift tags in the hoopWhy embroidered tags beat paper ones, tag and ornament sizes for a 4×4 hoop, felt and vinyl, the four color stops, what to put on a tag, stitching several in one hooping, and turning tags into keepsake ornaments.Read the guide
GuideIn-the-hoop embroidery: how ITH projects workWhat in-the-hoop projects are, how placement, tack-down and trim steps build an item in the hoop, the projects people make most, stabilizer for each, a zip pouch step by step and tips for a neat finish.Read the guide
Free previewEmbroidery file converterConvert PES, DST, JEF, EXP, VP3 and XXX files to any other machine format.Open
Want your own artwork on it?
Digitize a logo, drawing or photo, then stitch it on a key fob, patch or tag.


