Convert PCS to VP3
Open a .pcs embroidery file and download it as Husqvarna Viking / Pfaff VP3 for Husqvarna Viking, Pfaff machines. Every stitch is kept, and the conversion runs in your browser.
Drop your .pcs file here
DST, PES, JEF, EXP, VP3, XXX, PEC, U01, TBF, HUS, SHV, SEW, JPX, PCS · opened right in your browser
How to convert PCS to VP3
Four steps, all in your browser.
- 1
Open your .pcs file
Drop the PCS file into the converter above. It opens right in your browser for free.
- 2
Check the preview
Look over the stitch preview, size, stitch count and colors to confirm it's the right design.
- 3
Set the thread colors
Pick the thread for each color so your VP3 file shows the right colors.
- 4
Download the .vp3 file
Downloads are included in every plan. Copy the file to your Husqvarna Viking machine by USB stick or its transfer app.
What a PCS file is
PCS is the format of older Pfaff embroidery machines such as the creative 7570 and 2140, and of Pfaff's PC-Designer software. Designs made for those machines are PCS files.
A PCS file holds its colors as real color values and stores each needle position in sixths of a millimetre. Current Pfaff machines use VP3, as Husqvarna Viking machines do, so VP3 is the usual format to convert a PCS design to.
PCS vs VP3
| Property | .PCS | .VP3 |
|---|---|---|
| Made by | Pfaff | Husqvarna Viking / Pfaff |
| Machines | Pfaff | Husqvarna Viking, Pfaff |
| Thread colors | Stored in file | Stored in file |
| Mostly used by | Older Pfaff creative home machines | Husqvarna Viking and Pfaff home machines |
VP3 is the current embroidery format of Husqvarna Viking and Pfaff machines and their mySewnet software.
What changes when you convert
Every stitch is kept
PCS stores needle positions in sixths of a millimetre and VP3 in 0.1 mm steps, so each position moves to the nearest step, 0.05 mm at most. Moves longer than VP3 allows are split automatically.
Thread colors carry over
The colors stored in the PCS file are written to the VP3 file. You can change any thread before downloading.
Jumps become trims
Every jump between sections is written as a trim and a jump, so loose threads are cut on machines with an automatic trimmer.
Convert PCS to other formats
Convert other formats to VP3
Make a VP3 from an image
Free account
Create designs from your own artwork
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
PCS to VP3 questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
Can a current Pfaff machine read PCS files?
Some can. The creative icon 2 and creative 4.5 still list PCS among the formats they load, while the creative 1.5 loads VP3 only. Converting the design to VP3 works on all of them and keeps the stitches and the colors.
Does converting a PCS file change the stitches?
Barely. PCS stores positions in sixths of a millimetre and current formats use tenths, so each needle position moves to the nearest 0.1 mm: at most 0.05 mm, far less than the width of a thread.
Is converting PCS to VP3 lossless?
Every stitch is kept. PCS stores positions in sixths of a millimetre and VP3 in tenths, so each needle position moves to the nearest 0.1 mm, far less than the width of a thread.
Will my Husqvarna Viking machine read the converted file?
Yes, if it reads VP3. The file is written to the Husqvarna Viking / Pfaff VP3 specification and checked against independent readers. Most Husqvarna Viking machines read VP3; your manual lists the exact formats.
Is the converter free?
Opening a PCS file and checking its stitches, colors and size is free. Downloading the VP3 file needs a paid plan, from $8 a month billed annually.
Is my file uploaded anywhere?
No. The file is opened and previewed entirely in your browser. When you download, only its stitch data is sent to create the converted file.
Can I resize the design while converting?
Not in the converter, which keeps the stitches exactly as they are. To change the size, digitize the original artwork again in the digitizer, since scaling stitch files changes their density.
Keep going
Related tools and guides
- Machine guideHusqvarna Viking machinesVP3 files for Husqvarna Viking embroidery machines, with exact thread colors, mySewnet and hoop tips.Open
- Machine guidePfaff machinesVP3 files for Pfaff creative embroidery machines, with hoop sizes and transfer tips.Open
- Free toolEmbroidery file viewerOpen DST, PES, JEF and more in your browser: stitch preview, colors, size and stitch count.Open
- Free toolHoop size calculatorFind which hoops fit your design and how far to scale it down if it's too big.Open
- Free toolThread color chart & matcherBrother and Janome thread charts with codes, plus a color matcher between brands.Open
- GuideEmbroidery file formats explainedWhat each machine embroidery format is, which machines read it, and how to pick and convert the right one.Read the guide
Have the original artwork?
Digitize it from scratch for a cleaner VP3 at exactly the size you need.


