Embrizo

Bernina 700 E: hoop size, file format and designs

The Bernina 700 E is an embroidery machine with a maximum embroidery area of 15.7 x 8.3 in (400 × 210 mm). It reads EXP, DST, PES, PEC, JEF, SEW, PCS and XXX files from a USB stick and has 320 built-in designs.

The Bernina 700 E embroidery field, 400 by 210 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in400 × 210 mm field

Bernina 700 E embroidery specs

Type
Single-needle embroidery
Largest embroidery area
15.7 x 8.3 in (400 × 210 mm)
Hoops included
Large Oval, 145 x 255 mm, Medium, 100 x 130 mm, Small, 72 x 50 mm
File formats
EXP, DST, PES, PEC, JEF, SEW, PCS, XXX
Getting designs on
USB stick
Built-in designs
320
  • Embroidery-only machine with embroidery module L; the full 400 x 210 mm field uses the Maxi hoop, which is not one of the 3 included hoops.
  • No WiFi: designs load from a USB stick. Bernina's later B 700 PRO adds WiFi design transfer.

From Bernina's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 15.7 x 8.3 in field

Your own designs

From any image to a EXP file for the 700 E

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 400 × 210 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download EXP

    Copy the .exp file to a USB stick and load it on the 700 E.

Free designs

Free designs that fit the 700 E

Every free design fits a 4×4 in hoop and downloads as EXP with a free account.

All free Bernina designs

Free account

Make your first design for the 700 E

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Bernina 700 E questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Bernina 700 E?

Its largest embroidery field is 15.7 x 8.3 in (400 × 210 mm). It comes with Large Oval, 145 x 255 mm, Medium, 100 x 130 mm and Small, 72 x 50 mm hoops. Designs must fit inside the field of the hoop you use.

What file format does the Bernina 700 E use?

It reads EXP, DST, PES, PEC, JEF, SEW, PCS and XXX files. Use EXP for the best results: it keeps the thread colors.

How do I get designs onto the Bernina 700 E?

Use a USB stick (USB stick). With a USB stick, copy the .exp file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Bernina 700 E?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 15.7 x 8.3 in field and download a EXP file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Bernina 700 E?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other Bernina models

Popular embroidery machines

Designs for your 700 E, in seconds

Sign up free, upload any image and download a EXP file sized for your machine.