Embrizo

Brother PRS100: hoop size, file format and designs

The Brother PRS100 is an embroidery machine with a maximum embroidery area of 8 x 8 in (200 × 200 mm). It reads PES, PHC and DST files from a USB stick or a computer over a cable and has 445 built-in designs.

The Brother PRS100 embroidery field, 200 by 200 mm, with a fox design and a 4 by 4 inch field for scale4×4 in200 × 200 mm field

Brother PRS100 embroidery specs

Type
Single-needle embroidery
Largest embroidery area
8 x 8 in (200 × 200 mm)
Hoops included
8 x 8 in, 4 x 4 in, 1.6 x 2.75 in, 2 x 2 in, 1.5 x 1.75 in, 1.3 x 3 in
File formats
PES, PHC, DST
Getting designs on
USB stick; USB cable to a PC (included)
Built-in designs
445
  • Single-needle machine with a tubular free arm for sleeves, bags and other hard-to-reach areas; up to 1,000 stitches per minute.
  • Four of the six included frames are compact frames for small items; the cap frame is sold separately.

From Brother's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 8 x 8 in field

Your own designs

From any image to a PES file for the PRS100

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 200 × 200 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download PES

    Copy the .pes file to a USB stick and load it on the PRS100.

Free designs

Free designs that fit the PRS100

Every free design fits a 4×4 in hoop and downloads as PES with a free account.

All free Brother designs

Free account

Make your first design for the PRS100

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Brother PRS100 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Brother PRS100?

Its largest embroidery field is 8 x 8 in (200 × 200 mm). It comes with 8 x 8 in, 4 x 4 in, 1.6 x 2.75 in, 2 x 2 in, 1.5 x 1.75 in and 1.3 x 3 in hoops. Designs must fit inside the field of the hoop you use.

What file format does the Brother PRS100 use?

It reads PES, PHC and DST files. Use PES for the best results: it keeps the thread colors.

How do I get designs onto the Brother PRS100?

Use a USB stick or a computer over a cable (USB stick; USB cable to a PC (included)). With a USB stick, copy the .pes file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Brother PRS100?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 8 x 8 in field and download a PES file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Brother PRS100?

At this field size: left chest, right chest, center chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff and hand towel designs at their typical sizes. Larger placements like full front or full back need a bigger field or a split design.

Other Brother models

Popular embroidery machines

Designs for your PRS100, in seconds

Sign up free, upload any image and download a PES file sized for your machine.