Embrizo

bernette Chicago 7: hoop size, file format and designs

The bernette Chicago 7 is a sewing and embroidery machine with a maximum embroidery area of 4.3 x 6.7 in (110 × 170 mm). It reads EXP files from a USB stick and has 100 built-in designs.

The bernette Chicago 7 embroidery field, 110 by 170 mm, with a sunflower design and a 4 by 4 inch field for scale4×4 in110 × 170 mm field

bernette Chicago 7 embroidery specs

Type
Sewing and embroidery combo
Largest embroidery area
4.3 x 6.7 in (110 × 170 mm)
Hoops included
Large, 110 x 170 mm
File formats
EXP
Getting designs on
USB stick
Built-in designs
100
  • Reads .exp files only; bernette says to save the .inf file next to the .exp so the machine reads all the design information.
  • USB sticks must be USB 2.0 and 32 GB or smaller; Medium (100 x 100 mm) and Small (40 x 40 mm) hoops are optional.

From bernette's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 4.3 x 6.7 in field

Your own designs

From any image to a EXP file for the Chicago 7

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 110 × 170 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download EXP

    Copy the .exp file to a USB stick and load it on the Chicago 7.

Free designs

Free designs that fit the Chicago 7

Every free design fits a 4×4 in hoop and downloads as EXP with a free account.

All free designs

Free account

Make your first design for the Chicago 7

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

bernette Chicago 7 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the bernette Chicago 7?

Its largest embroidery field is 4.3 x 6.7 in (110 × 170 mm). It comes with Large, 110 x 170 mm hoop. Designs must fit inside the field of the hoop you use.

What file format does the bernette Chicago 7 use?

It reads EXP files. Use EXP for the best results: it keeps the thread colors.

How do I get designs onto the bernette Chicago 7?

Use a USB stick (USB stick). With a USB stick, copy the .exp file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the bernette Chicago 7?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 4.3 x 6.7 in field and download a EXP file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the bernette Chicago 7?

At this field size: left chest, right chest, center chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff and hand towel designs at their typical sizes. Larger placements like full front or full back need a bigger field or a split design.

Other bernette models

Popular embroidery machines

Sources (November 2026)

bernette and Chicago 7 are trademarks of their owners. Embrizo isn't affiliated with bernette.

Designs for your Chicago 7, in seconds

Sign up free, upload any image and download a EXP file sized for your machine.