Embrizo

Janome Continental M17: hoop size, file format and designs

The Janome Continental M17 is a sewing and embroidery machine with a maximum embroidery area of 11 x 18.1 in (280 × 460 mm). It reads JEF, JEF+, JPX and DST files from a USB stick, Wi-Fi or a computer over a cable and has 1230 built-in designs.

The Janome Continental M17 embroidery field, 280 by 460 mm, with a sunflower design and a 4 by 4 inch field for scale4×4 in280 × 460 mm field

Janome Continental M17 embroidery specs

Type
Sewing and embroidery combo
Largest embroidery area
11 x 18.1 in (280 × 460 mm)
Hoops included
RE46d, 11 x 18.1 in, SQ28d, 11 x 11 in, RE20d, 5.5 x 7.9 in, SQ10d, 3.9 x 3.9 in, ASQ27d quilting hoop, 10.6 x 10.6 in
File formats
JEF, JEF+, JPX, DST
Getting designs on
USB stick; USB cable to a PC (included); WiFi
Built-in designs
1230
  • Flat-bed machine with no free arm; embroiders at up to 1,200 stitches per minute.
  • Reads USB sticks formatted as FAT16 or FAT32 only; Janome recommends sticks of 64 GB or less.

From Janome's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 11 x 18.1 in field

Your own designs

From any image to a JEF file for the Continental M17

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 280 × 460 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download JEF

    Copy the .jef file to a USB stick and load it on the Continental M17.

Free designs

Free designs that fit the Continental M17

Every free design fits a 4×4 in hoop and downloads as JEF with a free account.

All free Janome designs

Free account

Make your first design for the Continental M17

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Janome Continental M17 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Janome Continental M17?

Its largest embroidery field is 11 x 18.1 in (280 × 460 mm). It comes with RE46d, 11 x 18.1 in, SQ28d, 11 x 11 in, RE20d, 5.5 x 7.9 in, SQ10d, 3.9 x 3.9 in and ASQ27d quilting hoop, 10.6 x 10.6 in hoops. Designs must fit inside the field of the hoop you use.

What file format does the Janome Continental M17 use?

It reads JEF, JEF+, JPX and DST files. Use JEF for the best results: it keeps the thread colors.

How do I get designs onto the Janome Continental M17?

Use a USB stick, Wi-Fi or a computer over a cable (USB stick; USB cable to a PC (included); WiFi). With a USB stick, copy the .jef file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Janome Continental M17?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 11 x 18.1 in field and download a JEF file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Janome Continental M17?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other Janome models

Popular embroidery machines

Designs for your Continental M17, in seconds

Sign up free, upload any image and download a JEF file sized for your machine.