Embrizo

BAI THE MIRROR: hoop size, file format and designs

The BAI THE MIRROR is a multi-needle commercial embroidery machine with a maximum embroidery area of 19.7 x 13.8 in (500 × 350 mm). It reads DST and DSB files from a USB stick or Wi-Fi.

The BAI THE MIRROR embroidery field, 500 by 350 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in500 × 350 mm field

BAI THE MIRROR embroidery specs

Type
Multi-needle commercial
Largest embroidery area
19.7 x 13.8 in (500 × 350 mm)
Hoops included
90 x 90 mm (2), 120 x 120 mm (2), 150 x 150 mm (2), 210 x 210 mm (2), 290 x 290 mm (2), 350 x 500 mm
File formats
DST, DSB
Getting designs on
USB stick; WiFi
  • 15 needles, one head and a 10-inch touchscreen; two cap hoops, a cap driver and a cap station are included.
  • USB sticks must be smaller than 64 GB and formatted FAT32.

From BAI's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 19.7 x 13.8 in field

Your own designs

From any image to a DST file for the THE MIRROR

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 500 × 350 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download DST

    Copy the .dst file to a USB stick and load it on the THE MIRROR.

Free designs

Free designs that fit the THE MIRROR

Every free design fits a 4×4 in hoop and downloads as DST with a free account.

All free designs

Free account

Make your first design for the THE MIRROR

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

BAI THE MIRROR questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the BAI THE MIRROR?

Its largest embroidery field is 19.7 x 13.8 in (500 × 350 mm). It comes with 90 x 90 mm (2), 120 x 120 mm (2), 150 x 150 mm (2), 210 x 210 mm (2), 290 x 290 mm (2) and 350 x 500 mm hoops. Designs must fit inside the field of the hoop you use.

What file format does the BAI THE MIRROR use?

It reads DST and DSB files. Use DST for the best results: it's the standard for commercial machines.

How do I get designs onto the BAI THE MIRROR?

Use a USB stick or Wi-Fi (USB stick; WiFi). With a USB stick, copy the .dst file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the BAI THE MIRROR?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 19.7 x 13.8 in field and download a DST file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the BAI THE MIRROR?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other BAI models

Popular embroidery machines

Designs for your THE MIRROR, in seconds

Sign up free, upload any image and download a DST file sized for your machine.