Embrizo

Tajima TMEZ-SC: hoop size, file format and designs

The Tajima TMEZ-SC is a multi-needle commercial embroidery machine with a maximum embroidery area of 14.1 x 19.6 in (360 × 500 mm).

The Tajima TMEZ-SC embroidery field, 360 by 500 mm, with a sunflower design and a 4 by 4 inch field for scale4×4 in360 × 500 mm field

Tajima TMEZ-SC embroidery specs

Type
Multi-needle commercial
Largest embroidery area
14.1 x 19.6 in (360 × 500 mm)
  • Single-head machine built with 9, 12 or 15 needles; maximum speed 1,200 rpm.
  • The 360 x 500 mm field is for the border frame; the tubular frame field is 335 x 453 mm.

From Tajima's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 14.1 x 19.6 in field

Your own designs

From any image to a DST file for the TMEZ-SC

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 360 × 500 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download DST

    Send the .dst file to the TMEZ-SC the way your setup allows.

Free designs

Free designs that fit the TMEZ-SC

Every free design fits a 4×4 in hoop and downloads as DST with a free account.

All free designs

Free account

Make your first design for the TMEZ-SC

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Tajima TMEZ-SC questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Tajima TMEZ-SC?

Its largest embroidery field is 14.1 x 19.6 in (360 × 500 mm). Designs must fit inside the field of the hoop you use.

What file format does the Tajima TMEZ-SC use?

Tajima TMEZ-SC machines use the DST format for designs. Check the manual for any other formats your model reads.

How do I get designs onto the Tajima TMEZ-SC?

Copy the design file to a USB stick and load it from the machine's screen.

Can I make my own designs for the Tajima TMEZ-SC?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 14.1 x 19.6 in field and download a DST file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Tajima TMEZ-SC?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other Tajima models

Popular embroidery machines

Sources (November 2026)

Tajima and TMEZ-SC are trademarks of their owners. Embrizo isn't affiliated with Tajima.

Designs for your TMEZ-SC, in seconds

Sign up free, upload any image and download a DST file sized for your machine.