Embrizo

Easy machine embroidery projects for beginners

15 easy embroidery machine projects for beginners, each with the hoop, stabilizer and a design to try, plus a first-week plan and a simple design of your own.

Updated · 9 min read

Small beginner projects: a towel, a tote and a patch with simple stitched designs
Embroidery idea generator screenshotFree toolEmbroidery idea generatorWhat should you embroider? A project idea with a free design, the size and the placement.Open the tool

A new embroidery machine is most fun when the first few projects come out right. The trick is to choose items that are flat, don't stretch and forgive small mistakes, then work up to knits, towels and caps once hooping feels routine.

This guide lists 15 beginner projects with the hoop size, stabilizer and a design to try for each, a seven-day plan for your first week, and how to turn a name or a simple drawing into your own design. For thread, needles and your first sew-out, start with machine embroidery for beginners.

An Easter basket with a pink liner embroidered with the name Lily beside a bunnyFree design makerEaster basket name embroidery design makerType the name, pick lettering and an icon, and see it sized for the item. Then turn it into a file for your machine.Make yours

What are the easiest embroidery machine projects for beginners?

The easiest projects are small designs on flat woven fabric such as cotton, linen, canvas or felt. The table runs roughly from easiest to hardest. The hoop is the smallest standard size that fits the suggested design, and the stabilizer is for the usual fabric of that item.

ProjectHoopStabilizerDesign to try
Hoop art on quilting cotton or linen4 × 4 inMedium tear-awayTulip bouquet, about 3,400 stitches
Flour sack or cotton tea towel4 × 4 inMedium tear-awayLemons or a whisk and spoon in a corner
Cloth napkins4 × 4 inWash-away or tear-away, since both sides showA monogram 40–65 mm tall or a holly sprig
Canvas tote bag4 × 4 in, or 5 × 7 in for a bigger designMedium tear-awayThe sunflower or a name
Pillowcase4 × 4 in or 5 × 7 inLight tear-awayA name 40–75 mm tall on the hem band
Quilt label5 × 7 inTear-away or light cut-awayName, maker and date, capitals at least 5–6 mm tall
Felt ornament4 × 4 inTear-awayThe snowflake or a name and year
Embroidered patch4 × 4 inFirm cut-away or heavy tear-away under twill or feltA 3 in round badge from the patch designer
In-the-hoop key fob or coaster4 × 4 inAs the design's instructions say, usually tear-away or cut-awayAny ITH design made for a 4 × 4 in hoop
Pet bandana4 × 4 inTear-away on cottonA paw print or the pet's name, stitched before you cut the triangle
Apron5 × 7 inMedium tear-away on canvasA 4–6 in design or a name on the bib
Baby bib or burp cloth4 × 4 inTear-away on woven cotton; soft cut-away on knitA sleepy moon or one initial
Hand or bath towel5 × 7 inTear-away or cut-away, plus a water-soluble toppingA name 1.5–4 in tall in a bold font
Crewneck sweatshirt5 × 7 inMedium cut-away, plus a toppingA 4–5 in chest design such as a rainbow
T-shirt4 × 4 inNo-show mesh or medium cut-away, with a ballpoint needleA light 3–4 in left chest design or a name

Every design in the free library is about 95 mm (3.75 in) on its longest side, so each one fits a 4 × 4 in (100 × 100 mm) hoop with a small margin. Most of the list needs only a tear-away or cut-away backing and a 75/11 needle, or an 80/12 or 90/14 on canvas; the last three add a water-soluble topping, cut-away under knits and a ballpoint needle.

What makes a project easy for a beginner?

A project is easy when the fabric stays still, the hoop holds it flat and the design is small enough to forgive slightly loose hooping. Look for these five things:

  • Woven fabric that doesn't stretch: quilting cotton, linen, canvas, denim and felt. Knits stretch in the hoop and pucker later, and terry and fleece swallow stitches unless you add a topping.
  • Something flat you can hoop: a towel, a napkin or a panel cut before it's sewn up. Bags, sleeves and caps need floating or special frames.
  • A design about 3–4 in (75–100 mm) across with two to five colors. A small design has fewer stitches to go wrong, and fewer colors mean fewer thread changes on a single-needle machine.
  • Bold shapes and lettering, with capitals at least 5 mm tall in a block font. Fine scripts and thin lines are harder to stitch cleanly.
  • A cheap blank. Practice on items that cost a few dollars, such as flour sack towels or a plain cotton tote, and on a scrap of the same fabric before the real thing.

Sew every new design on a scrap of the real fabric with the real stabilizer first. It takes ten minutes and catches almost every problem, from tension to a design too dense for the fabric, while it's still cheap.

Try it with your own design

Sign up free, upload an image and get a stitch preview in under a minute.

Drop your image here

PNG, JPG, SVG, PDF or AI · stays on your device

Not sure what to expect? See real examples or how it works.

Which projects fit a 4 × 4 in hoop, and which need 5 × 7 in?

Most beginner projects fit a 4 × 4 in (100 × 100 mm) hoop, the size most entry machines come with. A 5 × 7 in (130 × 180 mm) hoop adds tote fronts, aprons, quilt labels, towel names and sweatshirt chests.

HoopLargest design, with a marginProjects that fit
4 × 4 in (100 × 100 mm)About 90 × 90 mm (3.5 in)Napkins, tea towel corners, ornaments, patches, key fobs and coasters, baby bibs, pet bandanas, left chest designs, names on pillowcases
5 × 7 in (130 × 180 mm)About 120 × 170 mm (4.7 × 6.7 in)Tote bags, aprons, quilt labels, towel names, sweatshirt and T-shirt chests, two-line names
6 × 10 in (160 × 260 mm) and upAbout 150 × 250 mm and largerBig tote designs, jacket backs, quilt blocks and several small items in one hooping

If your machine has a 4 × 4 in field, you aren't stuck: the hoop size calculator shows how far to scale a design, and the free design pages for 4 × 4 in and 5 × 7 in hoops show designs and pairings that fill each size. Embroidery hoop sizes explains fields and margins.

A first-week plan for a new embroidery machine

Seven short sessions take you from the first stitch to a gift you'd be happy to hand over, with one new skill each day. Each takes an hour or less.

  1. Day 1: a test sew-out. Thread the machine, wind or load a bobbin and stitch a built-in design or the tulip bouquet on a cotton scrap with medium tear-away. Turn it over: under satin columns, the bobbin thread should show as a stripe down about the middle third.
  2. Day 2: hooping practice. Hoop the same fabric three times until it's taut like a drum without being stretched, then stitch a two-color design such as the anchor, about 2,900 stitches.
  3. Day 3: a tea towel. Mark the center of the design area with a water-soluble pen, line up the hoop's marks with it and stitch a corner design. This is your first finished item.
  4. Day 4: lettering. Stitch a name on a napkin or pillowcase with your machine's built-in fonts, capitals at least 8–10 mm tall, and check how the letters look up close.
  5. Day 5: a tote bag. Hoop only the front panel, or float the bag on sticky stabilizer, and stitch a 3–4 in design with an 80/12 or 90/14 sharp needle on canvas.
  6. Day 6: felt. Stitch an ornament or a 3 in patch on felt and cut it out. You'll see how a dense design behaves on a firm base.
  7. Day 7: your own design. Digitize a name, an initial or a simple drawing, as below, and stitch it on whichever item went best this week.

Keep a note or a photo of each sew-out with the fabric, stabilizer, needle and design. By day 7 you'll have a record of what works on your machine, and when something goes wrong, the embroidery problems and fixes guide lists causes and fixes in order.

Where to find designs for beginner projects

Start with designs that are already digitized and tested, so the only things that can go wrong are your hooping and threading.

  • Built-in designs and fonts on your machine are made for its hoop and are already in its format.
  • Free designs. The more than 130 free designs come in PES, DST, JEF, EXP, VP3 and XXX, sorted into categories such as flowers, kitchen, pets, monograms and seasonal sets, and into project sets such as designs for towels and for tote bags. You need a free account to download them, and you can stitch them on items you give or sell.
  • Ideas by occasion. The embroidery ideas pages pair each project with a design, a size and a placement, and the idea generator picks one when you can't decide.
  • Purchased designs from design shops work too. Buy the format your machine reads, and check that the design size fits your hoop before you pay.

Before you stitch a file from anywhere, open it in the embroidery file viewer to check its size, colors and stitch count. A design of 3,000–7,000 stitches sews in about 5–10 minutes on most home machines, plus the thread changes.

Which projects should beginners leave for later?

Some popular items are harder than they look. Leave these until you've finished a handful of the projects above:

ProjectWhy it's harderWhat it needs
Caps and hatsCurved, thick fronts with seamsA cap frame or careful floating; see the hat embroidery guide
Thin T-shirts and performance wearKnits stretch, and thin fabric shows every dense areaCut-away or no-show mesh, a ballpoint needle and a lighter design
Fleece blankets and plushThe pile swallows stitchesA water-soluble topping and heavier underlay
Leather and vinylEvery needle hole is permanentA sharp or leather needle, fewer stitches and no second tries
Jacket backs and large designsLong sew times, many colors, rehoopingA large hoop, or a design split into hoopings
Free-standing laceNeeds special designs and stabilizerLace designs and fibrous wash-away; see free-standing lace

Practice on a free design

167 ready-to-sew designs in every machine format, free with an account.

  • Paw print embroidery design
  • USA embroidery design
  • Teacher's apple embroidery design
  • Gift box embroidery design
Browse free designs

How to make your own simple design as a beginner

Once a few projects have come out right, your own design is the next step: a name layout, a child's drawing, a pet's silhouette or a simple logo. The easiest artwork has bold shapes, two to five flat colors and no fine lines.

  1. Start with clean artwork. A PNG or SVG on a plain background works best. The image checker flags fine detail, low resolution and too many colors before you digitize.
  2. Digitize it. Upload it to the Embrizo digitizer, set the width, about 75–90 mm for a 4 × 4 in hoop, and pick the fabric preset, such as woven, knit or fleece/towel. It removes the background, separates the colors, picks satin, fill or running stitch for each shape and adds underlay and pull compensation.
  3. Check the preview. The stitch preview and sew-out animation show how it will look, and the design check warns about details too fine to stitch, a high stitch count or many trims.
  4. Download your machine's format, such as PES for Brother or JEF for Janome, copy it to a USB stick and test it on a scrap.

Digitizing and the preview are free with an account; downloading the stitch file needs a plan. Simple, bold artwork like this is where automatic digitizing works best; detailed photos and specialty techniques still suit a hand digitizer. How to make your own machine embroidery designs goes further.

Free account

Put this guide into practice

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What are the easiest machine embroidery projects for beginners?

Flat, stable items with a small design: tea towels, cloth napkins, canvas totes, pillowcases, quilt labels, felt ornaments, patches and hoop art on cotton. Use a design about 3–4 in wide with a few colors, on woven fabric with medium tear-away.

What can you make with a 4×4 embroidery hoop?

Napkins, tea towel corners, ornaments, patches, key fobs, coasters, baby bibs, pet bandanas, left chest designs and names on pillowcases. Designs up to about 90 × 90 mm fit with a margin.

What fabric is easiest to embroider for beginners?

Medium-weight woven cotton, linen, canvas and felt, because they don't stretch and take a tear-away backing. Knits, terry towels, fleece and stretchy performance fabric need extra steps, so try them after a few good results.

What should I make in my first week with an embroidery machine?

A test sew-out on scrap, a two-color design for hooping practice, then a tea towel, a name on a napkin, a tote bag, a felt ornament or patch, and finally a simple design of your own. One new skill a day keeps any problem easy to trace.

Can beginners sell what they embroider?

Yes, once a project comes out right every time. Simple personalized items such as towels, totes and ornaments sell well, and Embrizo's free designs can be stitched on items you sell, though the design files themselves can't be resold or shared.

Keep reading

Related tools and guides

Your design, ready to stitch

Sign up free, upload an image and see it stitched in under a minute. Your image stays on your device.