Embrizo

How to digitize embroidery on a Mac

Digitize embroidery on a Mac without a PC: browser tools, Mac-native apps and Windows in a virtual machine compared, plus the workflow, USB sticks and viewing.

Updated · 8 min read

A laptop showing an embroidery design ready to download, with a USB stick and the stitched design

Many of the best-known digitizing programs, including Hatch, Wilcom EmbroideryStudio and Brother PE-DESIGN, run only on Windows. So Mac owners keep asking the same question in embroidery groups: do I need to buy a PC?

You don't. There are three ways to digitize on a Mac: a browser-based tool, software written for macOS, or Windows software running in a virtual machine. This guide compares them, walks through the browser workflow step by step, and covers the Mac-specific details of USB sticks and opening embroidery files.

Why digitizing on a Mac is harder than it should be

Embroidery software grew up on Windows PCs cabled to machines, and most vendors still build for Windows first. Here's where the main programs stand, from the vendors' own requirements:

ProgramRuns on a Mac?
EmbrizoYes, in Safari, Chrome or any modern browser, on Intel and Apple silicon Macs
EmbrillianceYes: native Mac and Windows apps, and one purchase covers both
Ricoma ChromaYes: Windows and macOS, with an internet connection
Janome Artistic DigitizerYes: current macOS versions, including Apple silicon Macs
Ink/StitchYes: inside Inkscape on macOS 12 or later
Hatch EmbroideryNo: Windows 11 (64-bit) only; on a Mac it needs Parallels or similar
Wilcom EmbroideryStudioNo: Windows 11 (64-bit), and the trial doesn't run on a Mac or in a virtual machine
Brother PE-DESIGNNo: Windows 10 and 11, with no Mac version
BERNINA Embroidery SoftwareNo: Windows; on an Intel Mac it runs in Boot Camp, and Parallels is supported only on a limited basis

Apple silicon adds a wrinkle. Boot Camp only exists on Intel Macs, so on an M-series Mac, Windows runs in a virtual machine as the Arm version of Windows 11, which runs most ordinary Windows programs through emulation. Software that depends on a USB security dongle or special drivers may not work that way, so check the vendor's guidance before you buy.

Three ways to digitize on a Mac, compared

Browser tool (Embrizo)Windows in a virtual machineMac-native software
SetupOpen a web page; nothing to installVirtualization software, a Windows license and the programInstall the app
Turns images into stitches automaticallyYes, from PNG, JPG, WebP or SVGDepends on the program and levelSome do (Chroma), some don't (Embrilliance)
Editing single stitchesNo: you change settings and the stitches are recalculatedYes, in full digitizing programsYes, in most
Apple siliconRuns natively in the browserArm Windows with emulation; dongles and drivers can failVaries by app
CostA free account digitizes and previews; saving files needs a planThree purchases: virtualization, Windows and the programOne-time or subscription
Other devicesAny computer, iPad or phone; designs are saved to your accountThat Mac onlyThe computers you license
Best forTurning logos and drawings into machine files quicklyShops tied to one Windows programHand digitizers who want an offline app

For most Mac owners who want a machine file from a logo or drawing, the browser tool is the place to start, and it's the only option that also works on an iPad or a borrowed computer. The best embroidery software for Mac list compares the options in more detail.

Try it with your own design

Sign up free, upload an image and get a stitch preview in under a minute.

Drop your image here

PNG, JPG, SVG, PDF or AI · stays on your device

Not sure what to expect? See real examples or how it works.

Digitizing in Safari or Chrome with Embrizo, step by step

  1. Prepare the artwork. Export a PNG with a transparent background, ideally 1,000–2,000 px across or more, or an SVG with text converted to outlines. From Adobe apps, the Illustrator and Photoshop pages list the export settings.
  2. Open the [digitizer](/digitize) and sign in, then upload the file or drag it in from Finder.
  3. Review the colors. The background is removed and the colors separated automatically. Merge near-identical shades, switch off anything you don't want stitched and match threads to the Brother or Janome chart.
  4. Set the size in millimeters or inches, or fit the design to a 4 × 4, 5 × 7, 6 × 10, 8 × 8 or 8 × 12 in hoop.
  5. Choose the fabric preset, then fine-tune density (0.4 mm by default), underlay, pull compensation, fill angle and maximum satin width if needed.
  6. Check the result in the realistic stitch preview and the sew-out simulation, along with the stitch count and thread list.
  7. Save the machine file: PES for Brother and Baby Lock, JEF for Janome, EXP for BERNINA, VP3 for Husqvarna Viking and PFAFF, XXX for SINGER, or DST for commercial machines. Saving machine files needs a plan, and the file lands in your Downloads folder.

Give the preview room: switch the browser window to full screen with Control-Command-F, then zoom into the preview to check small lettering and satin edges. A sharp Retina screen shows thread texture clearly, which makes gaps and too-thin lines easy to spot.

Mac-native software and when it makes sense

  • Embrilliance runs natively on Mac and Windows and is bought once. Essentials ($159) covers lettering, editing and merging; StitchArtist (Level 1 $179, Level 2 $389, Level 3 $699) is for drawing stitch objects by hand. The vendor says StitchArtist isn't an auto-digitizer.
  • Ricoma Chroma runs on Mac and Windows with one-click auto-digitizing in every tier. The first 12 months are paid up front, from $799.99 for Inspire in the US.
  • Janome Artistic Digitizer runs on current macOS, including Apple silicon, and is sold through Janome dealers.
  • mySewnet Embroidery (now CREATIVATE) runs on macOS Catalina or later; full digitizing is in the Elite membership.
  • Ink/Stitch is free and open source, and runs inside Inkscape on macOS 12 or later. You set up every stitch yourself; the Ink/Stitch tutorial walks through it.

These suit people who want to place stitches by hand or edit existing designs offline. If what you need is an image turned into a machine file, Embrizo gets you there in minutes without learning to digitize.

Running Windows software in a virtual machine

If your shop standardizes on a Windows program, or you need a machine maker's own software, you can run Windows inside macOS with virtualization software such as Parallels Desktop or VMware Fusion.

  1. Check that the vendor supports a virtual machine. Wilcom says its EmbroideryStudio trial doesn't run in one, and BERNINA supports Parallels only on a limited basis.
  2. Check the hardware. Wilcom lists 16 GB of RAM as the minimum for EmbroideryStudio, and the virtual machine needs that on top of what macOS uses.
  3. Install the virtualization software and Windows 11, then the embroidery program inside Windows.
  4. Connect USB devices to the virtual machine, not to macOS, when the program needs a security dongle or saves straight to a stick.
  5. Share a folder between macOS and Windows so artwork and finished files move easily.

It works for many people, but it means three purchases, two operating systems to keep updated and occasional trouble with dongles and drivers. Weigh that against the browser route before you commit.

Saving to a USB stick from a Mac

  1. Plug in a small USB stick, using a USB-C adapter if your Mac only has USB-C ports.
  2. Open Disk Utility (Applications > Utilities), choose View > Show All Devices and select the stick itself, not the volume indented under it.
  3. Click Erase, give it a short name in capitals such as EMBROIDERY, choose MS-DOS (FAT) as the format and Master Boot Record as the scheme, then click Erase. This makes a FAT32 stick that most machines read, and wipes everything on it.
  4. Drag the design from Downloads to the top level of the stick, not into a folder.
  5. Eject the stick in Finder before you unplug it, so the copy finishes.
What the machine doesMac causeFix
Shows no designs at allThe stick is formatted as exFAT, APFS or Mac OS ExtendedErase it as MS-DOS (FAT) with the Master Boot Record scheme
Lists extra designs that won't open, with names starting ._Hidden files macOS writes next to each fileIgnore them, or run dot_clean -m on the stick in Terminal, for example dot_clean -m /Volumes/EMBROIDERY
Lists the design but won't load itIt's still inside a ZIP, or the format is wrong for the machineDouble-click the ZIP to expand it and copy the machine file itself
Doesn't see the stickThe stick is too large or too new for an older machineUse a small, plain stick; some manuals give a maximum size

The transfer guide covers each brand's screens and the rest of the usual fixes.

Practice on a free design

167 ready-to-sew designs in every machine format, free with an account.

  • Penguin embroidery design
  • Poinsettia embroidery design
  • Snow globe embroidery design
  • Turtle embroidery design
Browse free designs

Opening and checking embroidery files on a Mac

macOS can't preview embroidery files. Finder shows a plain icon and Quick Look shows nothing useful, because PES, DST and JEF files hold stitch coordinates, not pictures. To see what's inside:

  • Embrizo's [embroidery file viewer](/tools/embroidery-file-viewer) opens DST, PES, JEF, EXP, VP3 and XXX files in the browser and shows the stitches, colors, size, stitch count and a sew-out.
  • The [file converter](/tools/embroidery-file-converter) changes a design from one machine format to another, for example DST to PES.
  • Your own software, if you use Embrilliance or another Mac app, opens files to edit them.

Before you sew, check the size against the hoop, the number of colors and the stitch count. The guide to checking a file before stitching has a full checklist.

Free account

Put this guide into practice

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

Can you digitize embroidery on a Mac?

Yes. Embrizo runs in Safari or Chrome on any Mac and turns PNG, JPG, WebP or SVG images into PES, DST, JEF and other machine files with nothing to install. Embrilliance, Chroma, Janome Artistic Digitizer and Ink/Stitch also run on macOS.

Does Hatch embroidery software work on a Mac?

Not natively. Hatch is Windows 11 software, so on a Mac it needs Windows in a virtual machine such as Parallels. Embrizo auto-digitizes images in a Mac browser without Windows.

What is the best embroidery digitizing software for Mac?

For turning images into machine files, Embrizo: it runs in the browser on Intel and Apple silicon Macs and auto-digitizes in seconds. For drawing every stitch by hand, Embrilliance StitchArtist is a native Mac option, and Ink/Stitch is a free one.

How do I format a USB stick for an embroidery machine on a Mac?

In Disk Utility, choose View > Show All Devices, select the stick, click Erase and pick MS-DOS (FAT) with the Master Boot Record scheme. That gives a FAT32 stick most machines read. Erasing wipes the stick, so copy anything you need first.

Why does my machine show strange ._ files from my Mac?

macOS writes small hidden files starting with ._ next to files on FAT sticks, and some machines list them as designs that won't open. They're harmless. Ignore them, or remove them by running dot_clean -m with the stick's path in Terminal.

Can I open a PES file on a Mac?

Not with the built-in apps, which can't read stitch files. Open it in a browser with Embrizo's embroidery file viewer to see the stitches, colors, size and stitch count, or in Mac embroidery software such as Embrilliance.

Keep reading

Related tools and guides

Your design, ready to stitch

Sign up free, upload an image and see it stitched in under a minute. Your image stays on your device.