Embrizo

How to make a split letter monogram for embroidery

Make a split letter monogram for embroidery: picking the letter and font, where to cut the gap, sizing the name, sizes for shirts and totes, and stitching it.

Updated · 8 min read

Three split letter monograms, B with Brooklyn, M with Miller and J with Jackson, stitched on fabric
Monogram maker screenshotFree previewMonogram makerDesign a classic one- or three-letter monogram and turn it into an embroidery file.Open the tool

The split monogram is the personalized design you see on kids' shirts, totes, pillows and beach towels: a bold initial with a band cut out of the middle and the name running through it. It looks complicated but is three decisions: the letter and its font, how tall the gap is, and how big the name can be inside it. Get those right and it stitches like any other monogram.

This guide covers each one, with sizes for the usual items and the stitching setup. To make one now, the split letter monogram maker cuts the gap, fits the name and warns you if the name gets too small for the size you pick.

What is a split letter monogram?

A split monogram (also called a split letter or split initial monogram) is a single capital letter, usually 3–8 in tall, with a horizontal band removed from its middle. A word sits inside the band: most often a first name for a child, a family name for a home item, or a word like Bride or Coach. The letter is usually the first initial for a person and the last-name initial for a family.

  • Letter and name: the classic, a bold letter with a script name in a contrasting color.
  • Letter, name and a small line: Est. and a year, or a date, under the letter.
  • Two-tone: the letter in one thread and the name in another; a third color is rarely needed.
  • Framed: the split letter inside a circle or a wreath, for pillows and hoop art.

Which letters and fonts split best?

Every letter can be split, but they don't all look the same after the cut. What matters is how much of the letter is left on each side of the gap, so the reader still sees the letter:

Letter shapeLettersAfter the splitTip
Strong verticalsB, D, E, F, H, K, M, N, P, R, UThe cleanest splits: both halves read at onceAny bold font works
RoundsC, G, O, Q, SLook good; the gap cuts through the widest partUse a heavy font so the curves stay thick
DiagonalsA, V, W, X, Y, ZRead well, but the gap meets the strokes at an angleKeep the gap a little narrower, about 25%
NarrowI, J, L, TLittle letter left beside a long nameUse a wide slab font, or let the name run past the letter

For the letter, pick a heavy face: varsity or slab letters, bold block capitals or a fat serif. Thin strokes become narrow satin columns after the cut and the letter loses its weight. For the name, a script with thick strokes contrasts best with a block letter; if the letter itself is a script, put the name in block capitals instead. The embroidery fonts guide compares faces that stitch well.

Try it with your own design

Sign up free, upload an image and get a stitch preview in under a minute.

Drop your image here

PNG, JPG, SVG, PDF or AI · stays on your device

Not sure what to expect? See real examples or how it works.

How tall should the gap and the name be?

Cut the gap at the middle of the letter, about 30% of its height (25% for diagonal letters). The name fills about 80% of the gap's height, which leaves a little bare fabric above and below it so it doesn't touch the letter, and it may run past the letter's sides by up to a fifth of the letter's width. Then check the name in millimeters: it needs to be at least 6 mm tall, and script lowercase about 4–5 mm, at the final size.

ItemLetter, aboutGap, aboutName capitals, about
4×4 in hoop3.7 in (95 mm) tall1.1 in (28 mm)16–20 mm
Kids' T-shirt4–5 in (100–125 mm)1.2–1.5 in (30–38 mm)18–25 mm
Tote bag5–6 in (125–150 mm)1.5–1.8 in (38–45 mm)22–30 mm
Throw pillow6–8 in (150–200 mm)1.8–2.4 in (45–60 mm)25–40 mm
Beach towel6–8 in (150–200 mm)1.8–2.4 in (45–60 mm)25–40 mm
Christmas stocking cuffabout 2.5 in (64 mm)about 0.75 in (19 mm)10–13 mm

Long names are the usual problem: Christopher in a 4 in letter comes out much smaller than Ava. Either let the name run wider than the letter, pick a bigger size, or use a shorter word. The lettering size calculator shows how tall any text comes out at a given width.

How to make a split letter monogram, step by step

  1. Open the split letter monogram maker, type the letter and the name, and add a small line if you want one.
  2. Pick the lettering for the letter (varsity, block or classic serif work best) and the two thread colors.
  3. Choose where it goes: a 4×4 hoop, a kids' tee, a tote, a pillow or a beach towel. The maker sizes the design and checks the name is at least 6 mm tall.
  4. Press Turn it into an embroidery file. The digitizer fills the letter, stitches the name in satin and shows every stitch. Previews are free with an account; downloading the PES, DST or JEF file needs a plan.

In desktop software the steps are the same by hand: set the letter, draw a rectangle across its middle, subtract it from the letter, then add the name as satin lettering centered in the gap. The maker does the cut and the fitting for you, and you can change the letter or the name and see the result at once.

How do you stitch a split monogram?

The big letter is a fill, so treat the design like a solid logo rather than lettering. The letter sews first and the name second, so the name sits cleanly on top of the bare band.

ItemStabilizerNeedleWatch out for
Kids' T-shirtNo-show mesh or medium cut-away75/11 ballpointHoop without stretching; the big fill pulls knits in
Canvas toteMedium tear-away75/11 or 80/12 sharpRemove handles from the hoop area or float the bag
Throw pillow frontFusible cut-away75/11 sharpStitch before the pillow is sewn
Beach or bath towelTear-away plus a water-soluble topping75/11 sharpThe topping keeps the name on top of the loops
SweatshirtMedium cut-away plus topping75/11 ballpointFloat bulky fleece instead of forcing the hoop

Making one for every child in a class or family? Make the first in the maker to pick the font and colors, then use the batch name embroidery tool for the rest, or change the letter and name and make each file in turn.

Practice on a free design

167 ready-to-sew designs in every machine format, free with an account.

  • Home sweet home embroidery design
  • Acorn embroidery design
  • Bat and moon embroidery design
  • Teddy bear embroidery design
Browse free designs

Split monogram ideas that sell

  • Back to school: a split initial with the first name on a backpack or a kids' tee.
  • Teachers: the last-name initial with Mrs. Smith on a tote.
  • Family home: the last-name initial with the family name and Est. and a year on a pillow.
  • Beach and pool: a big split letter on a beach towel, where it reads from across the sand.
  • Christmas: a split letter on a stocking cuff instead of the name alone.
  • Sports: the team's initial with a player's name, in team colors.

For more monogram styles, see the three letter monogram, the circle monogram and the baby monogram makers, and the monogram size guide.

Free account

Put this guide into practice

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What is a split letter monogram called?

It's called a split monogram, a split letter monogram or a split initial monogram. They all mean one large letter with a band cut through the middle and a name or word inside the band.

What size should a split monogram be on a shirt?

About 4–5 in wide on a kids' shirt and 5–7 in on an adult shirt or sweatshirt, centered on the chest with the top about 3 in below the collar. Keep the name at least 6 mm tall at that size.

Which font is best for a split letter monogram?

A heavy face for the letter, such as varsity, slab or bold block capitals, so each half stays thick after the cut, and a thick script for the name. Thin serifs and hairline scripts lose too much in the gap.

Can I make a split monogram with a long name?

Yes, but long names come out smaller. Let the name run past the letter's sides, choose a bigger size, or use a nickname. The maker shows the name's height and warns you below 6 mm.

Can I sell items with split monograms?

Yes. A split monogram you make from a letter and a name is yours to stitch on items you sell. Avoid copying a trademarked team logo; use the team's colors and a plain letter instead.

Keep reading

Related tools and guides

Your design, ready to stitch

Sign up free, upload an image and see it stitched in under a minute. Your image stays on your device.